FAQs Frequently Asked Questions about Our Products and Solutions

Ask a Question Ask a Question

All FAQs (1784 total: showing 441-460)

Is a reference temperature required for the 105E-L?
Is the 105E-L an appropriate portable option for making soil temperature measurements at multiple sites?
Does a CRBasic data logger require a special interface for the CS I/O port?
Why is the SC105 recommended for connecting a RavenXTV or RavenXTG to a data logger with a PakBus operating system?
Can an SC105 be used to talk to two devices simultaneously via two addresses?
Can an SC105 be used to replace a PDA to CS I/O port device?
Can a straight cable be used between the SC105 and a PC
How should an SC105 and a data logger be connected?
What is the difference between the SC105 and the SC932A?
If the battery cable for the CH100 is missing, can the battery be charged through the +12 and ground terminals—as long as the poles are not switched?
Can the INT/EXT plug on the CH100 be purchased?
What is the maximum distance a solar panel can be mounted from a CH100?
Can CH100 regulators have unidirectional flow, thereby separating two systems from the power consumption of the other system?
Can a 30W solar panel damage a CH100?
What would the output voltage of the CH100 be if there is no battery connected?
When should the light on the CH100 come on, and when should it be off?
When a CH100 approaches the maximum current output, does the voltage stay at a constant 12 V up until that point? Or does the voltage begin to taper off as it reaches the maximum current output?
Is the CH100 compatible for use with two BP24 battery packs in series to provide 24 Vdc?
Is a BP24 with a CH100 equivalent to a PS24?
What is the current consumption of the CH100 or PS100?

Previous Next