This product is no longer available and has been replaced by: SP10.
Image Not Available
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Overview
The SP10-PW is a 10 W photovoltaic power source capable of recharging batteries. Its 6.1 m (20 ft) cable terminates in a connector that attaches to a Campbell Scientific prewired enclosure. The connector in the enclosure then leads to a power supply or battery base to recharge the battery, allowing unattended operation of systems in remote locations, far from ac electrical sources.
This solar panel has a sufficient charging source for many of our system configurations in tropical to temperate latitudes.
Read MoreBenefits and Features
- Supplies electrical power in locations where ac power is unreliable, expensive, or not available
- Quick, secure connection to Campbell prewired enclosures for more efficient setup
- Recharges the sealed rechargeable battery of a PS150, PS200, BP12 (requires CH150 or CH200), BP24 (requires CH150 or CH200), CR3000, CR5000, CR6, or CRVW3
Detailed Description
The SP10-PW includes mounting hardware consisting of one pn 17492 U-bolt and matching nuts. The U-bolt has a 5.398 cm (2.125 in.) space between the U-bolt legs. This hardware allows the solar panel to be mounted to a 0.75 in. to 1.5 in. IPS pipe [25.4 to 50.8 cm (1 to 2 in.) OD].
Specifications
| -NOTE- | Solar panel characteristics assume 1 kW m-2 illumination and 25°C solar panel temperature. Individual panels may vary up to 10%. The output panel voltage increases as the panel temperature decreases. |
| Maximum Peak Power | 10 W |
| Current at Peak | 0.59 A |
| Voltage at Peak | 16.8 V |
| Dimensions | 41.9 x 26.9 x 2.3 cm (16.5 x 10.6 x 0.9 in.) |
| Weight | 2.1 kg (4.6 lb) |
Compatibility
Battery
The SP10-PW is intended to recharge 12 V Gel Cell or AGM lead acid batteries such as the batteries used with the PS150, PS200, BP12, BP24, CR3000, CR5000, and CR6. It is not intended for user-supplied 12 V flooded batteries such as deep cycle marine or RV batteries.
Documents
Brochures
Technical Papers
Frequently Asked Questions
Number of FAQs related to SP10-PW: 1
-
Regulators control the current flowing to the battery and prevent the battery current from flowing to the charging source. These solar panels do not include an on-board voltage regulator, so a stand-alone regulator would be required to complete a power supply.
Typically, these solar panels are connected to a CH100, CH200, PS100, or PS200, as well as to the battery base of a CR3000 or CR5000. The PS100 and the PS200, as well as the battery base of the CR3000 and CR5000, include an internal regulator.
Listed Under
Privacy Policy Update
We've updated our privacy policy. Learn More
Cookie Consent
Update your cookie preferences. Update Cookie Preferences