FAQs Frequently Asked Questions about Our Products and Solutions

Ask a Question Ask a Question

All FAQs (1647 total: showing 1381-1400)

Is there a way to allow a user to change constants in a CR800, CR1000, CR3000, or CR6 program without allowing the user to make other program changes?
If a CR1000 will not pass self-calibration, what can be done to fix that?
How many control ports are available on a CR1000?
How many RS-232 devices can the CR1000 handle?
How can a CR1000 be connected to a device that uses Modbus RTU over RS-485?
What are the RS-232 throughput capabilities of the CR1000 when connecting multiple serial devices?
Using a CR1000, is it possible to read the four different COM ports at different baud rates?
Can the RS-232 port on a CR1000 supply 12 Vdc power for a sensor?
What are the options for collecting data from a CR1000 over IP?
Is there an easy way to modify an existing checksum algorithm using CRBasic and a CR1000?
How many analog outputs does the CR1000 have?
How many tables can be defined for the CR1000?
Is it possible to save the data logger binary data as a file and download it to LoggerNet before it is stored in a CSV file?
Is there a way for a CR1000 to measure a 12 Vdc voltage without an external circuit?
Can the TCP port for the CR1000 internal HTTP Web server be changed from 80 to something else?
What is the default output file format for a CR1000?
Can a network camera be connected directly to a CR1000 or CR3000?
What is the maximum input voltage that a VDIV2:1 or VDIV10:1 can handle?
What principle does the control line of the CE4 and CE8 work with? Is it a digital signal or an analog voltage?
Can a CE4 or CE8 be used as a current source, measuring the voltage drop across a resistor to calculate resistance?

Previous Next