Allows siting far from ac sources
Overview
The SP50-L 50 W solar panel is a photovoltaic power source capable of recharging batteries. It is used for our CS110 Electric Field Meter or other systems that require 50 W solar panels. The SP50 allows unattended operation of systems in remote locations, far from ac electrical sources.
This solar panel needs to be used with either a 18529 Morningstar SunSaver, CH200, or CH150 regulator.
Read MoreImages
Detailed Description
The SP50 includes the 31107 Extended Mounting Kit for attaching the solar panel to a Campbell Scientific tripod or tower. The 31107 positions the solar panel approximately 25 cm (10 in.) from the tripod or tower, which reduces shadows from other components and guy wires. The zenith angle indicator and the slotted supports simplify installation. The 31107 began shipping with the solar panel in October 2014. This kit may be purchased separately to retrofit existing solar panels.
Regulators
One SP50 can be connected to the SOLAR charge input of the CH150, CH200 or 18529 SunSaver regulator to provide a peak charge of 50 W. Two SP50 solar panels can be wired in parallel to the charge inputs of the SunSaver 18529 regulator to provide a peak charge of 100 W.
Note: Regulators must be housed in an environmental enclosure.
CH150/CH200 Charge Controller
The CH150 and CH200 limit charging current to approximately 3.6 A and can precisely charge these battery families: EnerSys Genesis NP Series (BP12, BP24), EnerSys Cyclone Series, Concorde Sun Xtender Series (BP84, PS84), or a custom battery.
18529 MorningStar SunSaver
The 18529 Morning Star SunSaver limits charging current to approximately 10 A and can charge flooded batteries or sealed rechargable batteries such as our BP12, BP2, BP24, and BP84.
Specifications
| -NOTE- | Solar panel characteristics assume 1 kW m-2 illumination and 25°C solar panel temperature. Individual panels may vary up to 10%. The output panel voltage increases as the panel temperature decreases. |
| Cable Description | 16 AWG, 1-twisted pair |
| Maximum Peak Power | 50 W (100 W peak power when two SP50s are connected to one 18529 regulator) |
| Current at Peak | 2.9 A |
| Voltage at Peak | 17.5 V |
| Maximum Allowable Wind Gust Speed |
|
| On-board Regulator Included | No |
| Dimensions | 83.9 x 53.7 x 5 cm (33 x 21.1 x 2.0 in.) |
| Weight | 6 kg (13 lb) |
Compatibility
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
Additional Compatibility Information
Regulators
The SP50-L is compatible with the CH200, CH201, or 18529 Morning Star SunSaver.
Batteries
The SP50-L is compatible with EnerSys Genesis NP series (such as PS200, BP12, BP24), EnerSys Cyclone series, Concorde Sun Xtender series (such as BP84), or flooded batteries when used with the 18529 Morning Star SunSaver.
Note
- The 18529 MorningStar SunSaver draws a continuous 8 mA current drain.
Documents
Videos & Tutorials
Listed Under
Privacy Policy Update
We've updated our privacy policy. Learn More
Cookie Consent
Update your cookie preferences. Update Cookie Preferences